Hard Freeze System 5 Features: |
 |
12 Volt Pump with Photovoltaic Panel |
 |
Light-weight, easy to install collectors with all copper high performance absorbers |
 |
Complete "Easy Mount" rail system |
 |
Digital Twin Temperature readout with sensors, tape, & spare set of batteries |
 |
All solar loop parts & fittings include pre-soldered assemblies |
 |
50' roll of soft copper with compression unions and Ells |
 |
FREE 36' of 12" wall high temperature insulation |
 |
Tempering valve (3/4" C x C x C) also no solder tempering valve options |
 |
No soldering required for the entire solar loop |
 |
High Efficiency Rheem | Rudd Heat Exchanger tank with easy connections |
 |
FREE option: Choice of "Stacked" or "Side by Side" collector configuration(s) |
 |
Choice of 2 standard and 24 optional collector trim colors |
 |
FREE 2 Gallons of heavy duty Non-toxic propelene glycol included |
 |
A choice of options to make the system just right for you! |
Hard Freeze System 5 Parts List: |
 |
10 square foot solar thermal collectors, 20" wide x 6' long |
 |
Rail flush mounting kit with lags |
 |
PV pump and 10, 20, or 30 watt PV Panel |
 |
50' roll of 1/2" OD soft copper |
 |
Compression unions, 25' of sensor wire, lag screws, washers, tec screws |
 |
36' of high temperature insulation |
 |
Hose bibs and isolation valves to charge the solar loop |
 |
Expansion tank and floating ball chack valve on the return |
 |
Solar Loop Pressure Relief Valve (PRV) with splash guard |
 |
Coin vent with pre-soldered assembly |
 |
Temperature gauges |
 |
Tempering Valve |
 |
Two gallons of Heavy Duty Propylene Glycol |
 |
Special OG-300 Labeling |
 |
Installation & Owner's Manuals |
NOT Supplied: |
 |
Unless ordered the storage tank is NOT supplied |
 |
Water side plumbing |
Hard Freeze System 5 (For 80 or 120 HE Tank)
|
|
|
(4) 10-01 (40 ft2) for 2 to 4 people - W/OUT 81V080HE1 TANK |
|
$2,375.00 |
(6) 10-01 (60 ft2) for 4 to 6 people - W/OUT 81V080HE1 TANK |
|
$2,955.00 |
(8) 10-01 (80 ft2) for 6 + people - SSCI Only, W/OUT 81V080HE1 TANK |
|
$3,495.00 |
(4) 10-01 (40 ft2) for 2 to 4 people - WITH 81V080HE1 Tank |
|
$3,980.00 |
(6) 10-01 (60 ft2) for 4 to 6 people - WITH 81V080HE1 Tank |
|
$4,520.00 |
(6) 10-01 (60 ft2) for 4 to 6 people - WITH 82V120HE1 Tank |
|
$4,820.00 |
(8) 10-01 (80 ft2) for 6 + people - SSCI Only, WITH 81V080HE1 Tank |
|
$4,995.00 |
(8) 10-01 (80 ft2) for 6 + people - SSCI Only, WITH 82V120HE1 Tank |
|
$5,295.00 |
Collector Configuration Options
|
Standard Color: Musket Brown (a dark architectural brown) |
|
|
Standard Color Option: Musket Brown (a dark architectural brown) |
|
|
Optional Trim Colors: Choose from one of 24 Optional Colors |
|
|
Stacked Collector Array Installation Kit (w/ system purchase) |
|
|
Side by Side Collector Array Installation Kit (w/ system purchase) |
|
|
Substitute One 20-01 Collector for every two 10-01 collectors |
|
|
Hard Freeze System 5 Options
|
Additional 50 foot roll of 3/8" ID, 1/2" OD soft copper tubing |
|
|
Top Tempering Valve Assembly |
|
|
180ºF High Temperature snap switch (place on cold in) Opens 180ºF |
|
|
Quad Flow Diverter (with 4 - ¾” solder connections for duel tanks) |
|
|
Digital Twin Temperature Readout with sensors, tape, & batteries
|
|
|
Differential Control (12 Volt DTC-1 with sensors) |
|
$85.00 |
250º F 2" Temperature Gauge with ½” MPT fitting |
|
|
Insulation: High Temperature Solid 1/2" wall for 1/2" tube X 6' long |
|
|
Insulation: High Temperature Solid 1/2" wall for 3/4" tube X 6' long |
|
|
Rheem | Rudd | Richmond 80 Gallon 81V080HE1 tank, Delivered |
|
|
Rheem | Rudd | Richmond 120 Gallon 82V120HE1 tank, Delivered |
|
|
1 Gallon of Heavy Duty Propylene Glycol For down to -54 F |
|
|